By combining ultraviolet and infrared sensors with micro-circuit technology, Omniguard engineers have achieved the highest possible levels of sensitivity and reliability. The Model 860, which includes Vibro-Meter’s own Fire Event Analysis algorithm, offers the...
Direct digital drive feed forward control for less external interference. Compatible with all torsional oscillating viscosity transducers. For two sensors Large number display Two PT100 inputs Two 4 bis 20mA inputs Two 4 bis 20mA outputs Integrated in-line sensor...
Direct digital drive feed forward control for less external interference. Compatible with all torsional oscillating viscosity transducers. For one sensor Large number display One or two PT100 inputs One or two 4 bis 20mA inputs Two or four 4 bis 20mA outputs...
In-Line viscosity transducers for ranges up to 1,000, 2,500, 25,000, 250,000 and 5,000,000 mPa.s Maximum process pressure 40 MPa Maximum process temperature 450°C Torsionally vibrating sensor, no wearing parts Real time in-line viscosity measurement Technology proven...
Until now, slurry density recording in the mining industry is often being performed with risky and expensive nuclear densitometers. With the introduction of the ultrasonic slurry density analyzer from Arenal, the density recording can now be performed in a more...
The Densitrak D625 Density Meter is compact, convenient and suitable for a variety of applications, including chemical processing, waste water management and petroleum pipelines. It measures density and temperature, providing a temperature-compensated density reading...
Sampling pump to be connected to SGT, SGT-P, and MGT models of Senko gas detectors. When attached to a Senko gas detector, the sampling pump aids in monitoring gas concentrations in enclosed or confined areas, alerting the user to any leaks. Senko gas detectors...
Housed in a rugged case, the Senko MGT single bay docking station provides monitor management for calibration, bump test, event logging (USB), and setpoint adjustment. The MGT docking station has optimized gas consumption, helping the user save money spent servicing...
The Model S36 is a clamp-on ultrasonic flowmeter that offers high-accuracy ultrasonic technology to deliver accurate and reliable flow metering. The meter is able to provide volume flow, mass flow, density, temperature, and energy readings. With the addition of...
The Welker inLoop™ (LSSM-1) is a sampler designed to extract a representative sample of the flowing product out of a bypass stream and pump it into either a constant pressure or standard cylinder. it is a positive displacement pump with the patented Vanishing chamber...
The Essentials™ Gas Sampler is the most cost-effective, compact, and accurate gas sampling solution on the market. It features Welker’s Fresh Sample System™, in compliance with API 14.1, which incorporates a flow through sample path that automatically purges any...
The OIW80 Series Oil in Water Sensor is a complete solution for difficult oil in water measurements in waste water, industrial effluent monitoring, aquaculture, and all types of environmental surface water. The OIW80 optical oil in water sensor uses fluorescence...
The Welker HR Heated Instrument Regulator is a single-stage, spring-loaded, electrically heated pressure reducing valve designed to provide an analytical system with a conditioned gas sample stream at a safe output pressure and temperature. The HR’s controlled heating...
ISD Instrument Regulator The Welker I-Series Instrument Regulators maintain downstream pressure control in analytical, process, sampling, or injection systems to protect sensitive equipment from costly damage. These instrument regulators are spring-loaded...
The SonoPro Model U44 Portable clamp-on flowmeter delivers accurate and reliable flow metering for most liquids over a wide range of velocities by utilizing the ultrasonic transit-time measuring principle. Clamp-on transducers create no wear, zero pressure loss, and...
The LF664 uses Faraday’s Law of Electromagnetic Induction to measure the process flow. The device consists of two units; the first is a detector, through which the fluid to be measured flows and in which low level signals proportional to flow rates are obtained....
Most conventional sanitary magmeters are made from three or more pieces before it connects to your process piping. The more parts to a magnetic flow meter detector, the greater the chance for bacteria to hide and grow. Toshiba’s Gap-Free™ sanitary magmeter is...
The LF620/LF622 converters are available with HART protocol and as an option with Modbus and Profibus. User-friendly design provides ease of installation and operation. Wiring connection access of the LF620/LF622 converter is via the front panel of the unit. The LCD...
