A laser level measurement sensor is used for level control, plugged chute detection, and monitoring buildup. It is a non-contact device that can be used in bulk solids, pellets, or granular materials of all material dielectrics in a variety of vessels. It may also be...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
The BinMaster 3DLevelScanner provide continuous, non-contact level measurement using dust penetrating technology to provide unsurpassed bin volume accuracy. Unlike single point devices, it works by measuring multiple points within the bin. This advanced...
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It...
Simplify maintenance and minimize capital expenses with the Thermo Scientific™ AutoMITTER PRO™ Smart Multi-Variable Transmitter. Featuring a single board design that eliminates the need for separate transmitters, it is built for highly accurate volumetric rate...
Simplify installation for high point-count systems with the Thermo Scientific™ AutoPILOT PRO™ Six-Run Expandable EFM/RTU, featuring a completely integrated wire management system. This comprehensive unit offers full CSA/US Class I, Div 2 certification for use in...
Intelligently and reliably provide measurement and operational control of widely used LACT skids with the Thermo Scientific™ AutoLACT Flow Controller. Designed on the proven technology of the Thermo Scientific™ AutoPILOT PRO which has been accurately transferring...
The Thermo Scientific* Sarasota SG901 (formerly SG900) specific gravity analyzer is a self-contained bypass sample conditioner that measures the density, pressure and temperature of dry and wet gases. Compact model features fast response and continuous, high accuracy...
Thermo Scientific* Sarasota RTR900 retractor is designed for use with the Thermo Scientific ID900 gas density meter in high-pressure measurement applications. Allows insertion and removal of the Thermo Scientific ID900 under operational line conditions, allowing...
The Thermo Scientific* CM515 and HME900 density converter electronics provide an optimum data processing solution. Thermo Scientific density meters or specific gravity analyzers are available with either a HART compatible, field-mounted density converter or a control...
The Thermo Scientific* Sarasota Gas Density Meters are engineered to reliably measure density or density related variables within the oil and gas, petrochemical and power industries. Offers near real-time control signal availability and ensures plant efficiency and...
The AVM-BD-F and AVM-BD-W are designed to measure full pipe, clean gasses or liquids over various temperature and/or pressure ranges. Typical applications include custody transfer or bi-directional flow of potable water, high pressure steam, combustion air, compressor...
The AVM-S-F and AVM-T-W are designed to measure full pipe, clean gasses or liquids over various temperature and/or pressure ranges. Typical applications include potable water, high pressure steam, combustion air, compressor surge control, oxygen & nitrogen,...
The AFM-V-F and AFM-V-W are designed to measure full pipe, clean gasses or liquids over various temperature and/or pressure ranges. Typical applications include potable water, high pressure steam, combustion air, compressor surge control, oxygen & nitrogen,...
The durable GFG G460 continuously measures and displays readings for up to six gases at the same time. The robust and watertight (IP 67) housing incorporates a built-in concussion proof boot to survive the toughest environments. GfG G460 detectors are available for...
GfG G450 is a compact and lightweight 4-gas detector that continuously measures CO, H2S, O2 and combustibles in ambient air. Its functional and watertight design (IP 67) incorporates an impact proof, rubberized housing to meet the toughest requirements of harsh...
Federal Signal’s Model 300GC SelecTone® Speaker Amplifier is designed to produce crisp, clear tones, digital voice messages and live public address in harsh environments with high ambient noise levels. The rugged speaker cone and projector are constructed of...
Federal Signal ‘ s Model 302GCX SelecTone® Speaker Amplifier is designed to produce tones, digital voice messages and live public address in harsh environments with high ambient noise levels. The rugged speaker cone and projector are constructed of spun...
The Federal Signal MicroStat® is a compact, Type 4X status indicator*. Ideal for OEM applications, the MicroStat comes pre–assembled as 1–, 2–, 3–, 4–, or 5–high light units. The user selects combinations from five colors (amber, blue, clear, green and red). O–rings...
