Pressure transmitters are used in both process and storage environments. The PT-400 is for external mounting on the tank and is designed for extreme environments. This heavy-duty pressure transducer can handle dirt and fine dust, water spray and wash downs, outdoor...
BinMaster’s BM-T tilt switch is used for point level detection in a silo, over a conveyor belt, over an open pile or pit, and is also used for plug chute detection. It is suspended vertically over a control point using a wire rope, chain or flexible hanger. As the...
A capacitance probe is a point level indicator, commonly used for high or low level detection in a bin, tank or silo. BinMaster capacitance probes offer fail-safe operation, “Quick-Set” calibration, plus interference-free operation – working far below the RF level of...
The BinMaster vibrating rod point level sensor – also called a vibrating level switch – is a reliable point level indicator used for high and low level indication or plugged chute detection. It can be used in light, fluffy powders and flakes with bulk densities as low...
A diaphragm or pressure switch works by activating a sensitive micro-switch when material reaches the level of the switch in the bin. It sends an alert that can be used to start or stop a process or alert to a high, medium or low level in the vessel. The diaphragm...
Rotaries are a common point level indicator used for high-, mid- and low-level material detection in bins, tanks and silos. Rotaries are wired to a horn, alarm or light panel to send an alert when material reaches the desired level. BinMaster offers the standard BMRX...
A laser level measurement sensor is used for level control, plugged chute detection, and monitoring buildup. It is a non-contact device that can be used in bulk solids, pellets, or granular materials of all material dielectrics in a variety of vessels. It may also be...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
The BinMaster 3DLevelScanner provide continuous, non-contact level measurement using dust penetrating technology to provide unsurpassed bin volume accuracy. Unlike single point devices, it works by measuring multiple points within the bin. This advanced...
The SmartSonic is designed for continuous non-contact level measuring and monitoring of tanks, bins, and silos. Its transmitter features high efficiency, narrow beam design technology using a wide frequency bandwidth to enhance operation in difficult applications. It...