Pressure transmitters are used in both process and storage environments. The PT-400 is for external mounting on the tank and is designed for extreme environments. This heavy-duty pressure transducer can handle dirt and fine dust, water spray and wash downs, outdoor...
BinMaster’s BM-T tilt switch is used for point level detection in a silo, over a conveyor belt, over an open pile or pit, and is also used for plug chute detection. It is suspended vertically over a control point using a wire rope, chain or flexible hanger. As the...
A capacitance probe is a point level indicator, commonly used for high or low level detection in a bin, tank or silo. BinMaster capacitance probes offer fail-safe operation, “Quick-Set” calibration, plus interference-free operation – working far below the RF level of...
The BinMaster vibrating rod point level sensor – also called a vibrating level switch – is a reliable point level indicator used for high and low level indication or plugged chute detection. It can be used in light, fluffy powders and flakes with bulk densities as low...
A diaphragm or pressure switch works by activating a sensitive micro-switch when material reaches the level of the switch in the bin. It sends an alert that can be used to start or stop a process or alert to a high, medium or low level in the vessel. The diaphragm...
Rotaries are a common point level indicator used for high-, mid- and low-level material detection in bins, tanks and silos. Rotaries are wired to a horn, alarm or light panel to send an alert when material reaches the desired level. BinMaster offers the standard BMRX...
A laser level measurement sensor is used for level control, plugged chute detection, and monitoring buildup. It is a non-contact device that can be used in bulk solids, pellets, or granular materials of all material dielectrics in a variety of vessels. It may also be...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
Radar is commonly used to continuously measure the level of powders, granules, solids or liquids in a vessel. The NCR-80 non-contact radar excels in powders and solids with a dielectric as low as 1.2. It measures in a very narrow 4° beam angle at distances up to 393...
The BinMaster 3DLevelScanner provide continuous, non-contact level measurement using dust penetrating technology to provide unsurpassed bin volume accuracy. Unlike single point devices, it works by measuring multiple points within the bin. This advanced...